WINCHMAX CETOP5/NG10 High Flow Wireless Remote Control Operated Modular Directional Control Valve with Pressure Regulator and Manifold Block
- SOLENOID OPERATED DIRECTIONAL HYDRAULIC CONTROL VALVE DOUBLE 24V COILS.
- High flow up to 120l/min.
- Removable din plug connector with clear cover, cable gland, and led indicator.
- Configuration; spring-centred p open to tank, a and b blocked.
- Max pressure p, a, b, 31.5 mpa (350 bar/4500 psi).
- Flow rate (l/min): 120 max.
- Max. Working pressure (mpa): a, b, p port: 31.5 - t port: 16
- Hydraulic fluid: mineral oil
- Seal material: nbr seals
- Temperature range (°c): -30 to +80
- Viscosity range (mm2/s): 2.8 to 500
- Oil cleanliness class according to is0 4406 class: 20/18/15
- MANIFOLD SUBPLATE CETOP5/NG10 HYDRAULIC
- Install between the manifold block and directional control valve. When the set pressure is exceeded, p will bypass across to t.
- Easy to operate rotary calibration control with lock ring.
- Maximum flow 70l/min.
- 70-250 bar setting range.
- WINCH REMOTE CONTROL, WIRELESS
- Supplied with two large grip handheld controllers.
- Operating range over 30m (100ft)
- Control box housing a wireless receiver and fitted with a socket for optional wander lead connection.
- 8m control box power supply leads fitted with ring terminals.
- 250mm output cables to connect to the coils on an existing solenoid control valve.
- Approximate control box size is 75mm x 105mm x 60mm, with two lugs for convenient fixing.
- easy to fit, full installation instructions supplied.